Front Seat Extreme / Stories

Nov 05, 2026 / Build Journal, Drifting, JZX100 Mark II, Sappy Racing, Tafari Carter

Sappy Racing Goes Back to Basics: Cutting Weight on Tafari's JZX100 Mark II

Mechanic working on the yellow Sappy Racing JZX100 Mark II during weight reduction

FSE STORIES / BUILD JOURNAL / SAPPY RACING

Inside the workshop, Sappy Racing is taking a back-to-basics approach to Tafari Carter’s JZX100 Mark II. The goal is simple: remove unnecessary weight, make the most of the car’s available power, and find the grip needed to put it down.

Yellow JZX100 Mark II rear quarter disassembled at Sappy Racing
Rear-quarter teardown underway at Sappy Racing.

THE CUTTING STARTS NOW

The photos from the shop tell the story before a single lap is turned. The yellow Mark II is stripped back, with exposed structure, the engine bay opened up and the rear of the car undergoing serious work. This isn't a cosmetic refresh. It's an effort to take weight out of the chassis and rethink how the car uses the performance it already has.

“Simple tasteful work on Tafari JZX100 Mark II,” Sappy explained in an update shared with Front Seat Extreme. He described the approach as “cutting as much weight as possible.”

His reasoning is direct: the car is not making huge power, so reducing weight is one way to try to improve its pace. The team is pursuing a lighter package rather than relying on a power increase alone.

Exposed front chassis and empty engine bay of Sappy Racing Mark II
The front structure is stripped down as the team works through the build.

LESS WEIGHT. MORE BITE.

Stripping a car is only the first phase. Sappy says that after the team maximizes its weight reduction, it plans to get the Mark II back on the road or track for driving and suspension adjustments.

“After we maximize the amount of weight to cut, we will drive the car and make suspension changes to make sure we get AS MUCH MECHANICAL grip as we can!”

— Sappy Racing, shared project update

It's the sort of development that doesn't always show up in a highlight reel. Getting the car lighter can change the way it responds. Tuning the suspension and mechanical grip is then critical to getting usable forward drive out of corners. The team is aiming for better forward bite, but the results will only be known once the car is tested.

Open trunk showing weight reduction and bare chassis structure on yellow Mark II
A look inside the stripped rear section of the Mark II.

PREP BEFORE PAINT

The latest progress photos show the stripped shell in daylight, with the bare front structure and gutted rear section visible. Sappy reports that the surfaces have been power-washed with a strong degreaser and allowed to dry in preparation for paintwork inside and outside.

The work is still underway. These are progress images—not finished-car photography—and the current appearance is part of the story.

Cleaned engine compartment and exposed front structure of yellow JZX100 Mark II
The car outside after degreasing and early surface preparation.

WHAT HAPPENS NEXT?

Weight removal is underway. Surface preparation is moving toward paint. Testing and suspension adjustments are planned after the major weight-reduction work is completed. There is no confirmed performance figure or completion date to report yet.

Front Seat Extreme will continue documenting the build as new workshop photos and technical updates come in. This is where the journey gets interesting: not just what the car looks like when it is finished, but every decision that gets it there.

Follow the build: More FSE Stories · FSE Bulletin Board · FSE Media

← More FSE Stories
MORE FROM FRONT SEAT EXTREME

Enjoyed this story?
Keep exploring.

More real builds, track days, and stories from the people behind them.

Browse all stories